MOON 740P

Balanced line preamplifier

€ 9.000,00 Price include 21% VAT Price exclude VAT € 7.438,02

AVAILABILITY: 1 WEEK

FINISH

Quantity

Music Emotion

Stereophile

Soundstage Hifi

Fair Audio

Hi-Fi News

Positive Feedback

The MOON 740P is a dual-mono fully balanced differential design, following in the footsteps of the reference 850P preamplifer. This "next generation" Evolution series preamplifier uses various recently in-house developed technologies that help create a level of performance that can be best described as astounding. Intended for those seeking high-performance in an elegant, stylish yet uncomplicated package, the 740P leaves your music uncolored and free of any grain or noise; The purity of the signal remains uncompromised, allowing the music to be heardas was intended from day it was recorded. New technologies include the M-eVOL2 volume control, with a phenomenal 530 steps, allowing for an extremely precise level adjustment. Of course, key features you'd expect in a MOON Evolution Series products are present such as SimLink™ and M-Lock, just to name a few, as well as both RS-232 and IR ports for custom-install environments. Finally, a plethora of user selectable cosmetic options are available at the time of purchase.

Features

- 4 stages of our M-LoVo (MOON Low Voltage) DC regulation circuit; a highly sophisticated circuit that is virtually free of noise, yielding an exceptionally fast, precise, and stable DC voltage. The result is a power supply with a virtually unmeasureable noise floor

- A dual-mono oversized power supply using 2 toroidal transformers in conjunction with 5 stages of DC voltage regulation and extensive choke filtering

- M-eVOL2 volume control circuit using MDAC's (operating in a current steering R-2R configuration) which alter the audio signal's amplitude, yielding no sonic degradation of the signal, regardless of the selected volume setting

- Power supply voltage regulation includes i²DCf (Independent Inductive DC Filtering); There is one inductor dedicated to each integrated circuit type component (DAC, Op-Amp, etc.) in the audio circuit's signal path; 24 stages in all

- M-Lock for "user selectable" maximum volume setting lock-out for each line input

- "Gain offset" for each individual line input with a ±10dB range

- Each line input is fully configurable to be "home-theater ready", where the gain section of the 740P is bypassed

- RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates

- IR input for external control

- 12 Volt trigger output for remote operation

- SimLink™ controller port for 2-way communications with other compatible MOON components

- 4-Layer printed circuit boards with pure copper tracings for a much shorter signal path; This results in greater sonic accuracy and a dramatically improved signal-to-noise ratio

- Ultra rigid chassis construction to minimize the effects of external vibrations

- Accurate matching of the very finest quality electronic components in a symmetrical circuit design

- Includes FRM-3 remote control.

Specifications

- Specifications

- Type Solid State

- Configuration Dual-Mono / Fully Balanced

- Power Supply Transformers 2 x 10VA (audio); 1 x 10VA (controller)

- Power Supply Capacitance 44,000µF

- Circuit Topology Open Loop

- Balanced Inputs (XLR) 2 pairs

- Single-ended inputs (RCA) 3 pairs

- Input Impedance 22,000Ω

- Input Sensitivity 200mV - 4.0V RMS

- Balanced Outputs (XLR) 1 Pair

- Single-Ended Outputs (RCA) 2 Pairs (variable & fixed)

- Output Impedance (RCA / XLR) 50Ω / 50Ω

- Gain Control M-eVOL2 (R-2R)

- Gain 9dB

- Signal-to-noise Ratio (20Hz - 20kHz) 120dB

- Maximum Output Voltage - XLR 12 Volts

- Maximum Output Voltage - RCA 6 Volts

- Frequency Response 5Hz - 100kHz (+0 / -0.1dB)

- Crosstalk @ 1kHz -116dB

- IMD unmeasurable

- THD (20Hz - 20kHz) 0.001%

- 12 Volt Trigger Output Operation Direct Logic (0V = off, 12V=on) using a 3.5mm mono jack with an output impedance of 1000Ω and current requirement of 12mA

- SimLink™ Port 1 input + 1 output each on 1/8" mini-jack

- RS-232 Port 9-pin female DB connector

- IR input 1/8" mini-jack

- Remote Control FRM-3 All-Aluminum Back-lit Full Function

- Display Type 8 character dot matrix LED

- Power Consumption @ idle 20 Watts

- AC Power Requirements 120V / 60Hz 220-240V / 50Hz

- Fuse Replacement 120V / 220-240V 200mA short slow blow / 100mA short slow blow

- Shipping Weight 35 lbs / 16 Kgs

- Dimensions (w x h x d) 18.75 x 4.1 x 16.81 in. (47.6 x 10.4 x 42.7 cm.)

	Quantity	Article	Starting price	After that	Period	Total
	Quantity	Article	Unit price	Total
		Quantity:	(Gift)

	Subtotal



	Total
*Prices include 21% VAT		*Prices are exclusive of VAT
Total weight

Shopping cart

PRODUCT BRANDS

Search

MOON 740P

Balanced line preamplifier